AL6061 Aluminum Precision Parts Motor Housing , Rustproof CNC Aluminum Enclosure

Precision Aluminum CNC Machining Parts For Mini Motor Housing

Quick Detail

Description

This CNC Machining Part is based aluminum profile 6061 material to processing, first of all, we check the raw material dimension is fine or not, the second is that according to the drawing, use the CNC Gear shovel machine to do the dimension, the third is that accroding to the drawing, uthe forth is that use the CNC to do exact dimension, the fifth is do anodizing , the last step is riveting, and then inspection/packing. First inspection and patrol inspection are done in processing .

Note

What should we pay attention to when machining CNC precision parts?
1. The CNC lathe processor must read the content of the process card clearly before processing, clearly know the part, shape, drawing and size of the workpiece to be processed, and know the processing content of the next process.

2. Before the workpiece is clamped, the size of the blank should be measured whether it meets the requirements of the drawing. When the workpiece is clamped, it must be carefully checked whether its placement is consistent with the programming operation guide.

3. The self-check should be carried out in time after the rough machining is completed, so that the data with errors can be adjusted in time. The content of the self-inspection is mainly the position and size of the processing part.

• Whether the workpiece is loose;
• Whether the workpiece is correctly centered;
• Whether the dimension from the machining position of CNC hardware parts to the reference edge (reference point) meets the requirements of the drawing;
• The size of the position between the CNC machining parts. After checking the position and size, the rough-cut shape ruler should be measured (except for arcs).

4. Finish machining only after rough machining self-inspection. After finishing processing, workers should conduct self-inspection on the shape and size of the processed parts: check the basic length and width dimensions of the processed parts on the vertical surface; measure the basic point size marked on the drawing for the processed parts of the inclined surface.

5. After the worker completes the self-inspection of the workpiece and confirms that it is in compliance with the drawings and process requirements, the workpiece can be removed and sent to the inspector for special inspection.

We can offer CNC machining partd for custom design.

AL6061 Aluminum Precision Parts Motor Housing

Rustproof Aluminum Precision Parts Motor Housing

Motor CNC Aluminum Enclosure

AL6061 Aluminum Precision Parts Motor Housing , Rustproof CNC Aluminum Enclosure Images